Products >> Pins and Rods
 
We offer a wide range of Pins and Rods (Threaded or Bare) in Mild Steel and Brass alloys with lot of different sizes in combination with threads and coating. We also have fully threaded rods (DIN 925) with length of 1 meter, 2 meters or 3 meters as per requirement. You can get precision quality products with reasonable price and great service. We manufacture pins and rods as per DIN and other international standards and tolerances.

Following is the technical specifications of the products we offer. If you have got any peculiar need regarding tapper pins, dowel pins, parallel pins or threaded rods, don't hesitate to forward us your requirement.
threaded rods
 
|
|
|
|
mild steel pins and rods  
 
 
 
 
 
 
 
PINS AND RODS ARE AVAILABLE IN THE FOLLOWING SPECIFICATIONS :
 
  1. TYPES
  2. THREADS
  3. MATERIAL
  4. FINISH & COATING
 
TYPES :
 
COMPONENT DIN SPECIFICATIONS
     
TAPPER PINS
DOWEL PINS
SLOTTED SET SCREWS WITH FULL DOG POINT TAPER PINS
SLOTTED SET SCREWS WITH FLAT POINT
THREADED RODS
PINS
PARALLEL PINS
PARALLEL KEYS		   DIN 1, 2339
DIN 7
DIN 417
DIN 551
DIN 925
DIN 2338
DIN 6325
DIN 6885
 
 
 
 
 
 
 
 
 
 
 
THREADS :
 
ISO Metric (MM Threads)
Thread sizes : M6, M8, M10, M12
Length : Any length as per customer's requirement
 
BSW / UNC / UNF Threads (Inches)
Thread sizes : 1/4, 5/16, 3/8, 7/16, 1/2
Length : Any length as per customer's requirement
 
MATERIAL :
 
  1. MS (MILD STEEL)
  1. BRASS
  • FREE CUTTING IS 319 TYPE (I)
  • FREE CUTTING BS 249 TYPE (I)
  • HIGH GRADE FREE CUTTING
 
FINISH & COATING :  
 
NATURAL FINISH, YELLOW ZINC PLATED, BLUE ZINC PLATED, BLACKENING, NICKLE PLATED AND TIN PLATED.
 
 
| Top | Home |